Ricable - MB5 /11829 MAGNUS SUB 5 m - RCA

Brand: RICABLE
Διαθεσιμότητα: Μη Διαθέσιμο
236.00€ 155.00€

echnical Specifications

Capacity:
55pF/mt.
Resistance:
22 Ohm/Km
Impedance:
75 Ohm

Constructive Specifications

Geometry:
Coaxial
Conductors Material:
Pure Copper OFC (Oxigen Free Copper) 99,999%
Conductors Structure:
1 Filo Solid Core
Conductors Size:
1 mm
Conductors Surface:
1 mm2
External Diameter:
Ø 10 mm
External Shielding:
OFC tinned copper braid + Aluminium Foil
Internal Shielding:
OFC tinned copper braid + Aluminium Foil
Dielectric insulation:
Polyethylene Foam
External Protection:
High density sheath with polyethylene/Nylon braid
Material Connector:
Tellurium Copper Alloy
Connectors Features:
  • 24k Gold Plated Copper/tellurium alloy body
  • Interference Suppression Alloy
  • non-magnetic shell
  • Polo Central at expansion
  • Ring mass with 8 elements
  • Teflon dielectric
  • Suppression Shell
Contacts:
Hand welded with special eutectic alloy Sn/Ag/Cu

Warranty and Certifications

Certifications:
  • Designed in Italy
  • Handmade in Italy
  • CE
  • RoHS
  • FCC
Warranty:
Lifetime Warranty On-Site (Requires free activation)
 
 
 

The Magnus series represents the first handcrafted Ricable production, Made in Italy, expressly designed to support mid-range Hi-Fi equipment. It has technological solutions deriving from the series Dedalus and Invictus to guarantee an exclusive support for your devices, without intruding into the esoteric.

 

Magnus Subwoofer is a Hi-Fi signal cable specifically for active Subwoofer, designed and handmade in Italy. It is based on a Solid-Core 1 mm2 copper conductor OFC 99.999% with special polyethylene dielectric, able to give excellent control at low frequencies and to improve its body density.

The shielding is quadruple, with double tinned OFC copper braiding combined with two aluminum/mylar sheets, to block any type of interference harmful to low frequency signals.

Ending in new connectors with copper contacts with monobloc body of full turned alloy. With these connectors there is an improvement of the electrical parameters of more than 30% compared to common brass connectors. 24k gold plated with gold/copper specific electrolysis technique.

Magnus Subwoofer is a cable of substance with cutting-edge technical solution, ideal support for mid-range Hi-Fi electronics.

Highlights

  • Conductor 1 mm2 Solid Core, OFC pure copper at 99.999%.
  • Coaxial geometry with polyethylene dielectric, specific for low frequency signals.
  • Connectors with contacts made entirely of copper. With these connectors there is an improvement of the electrical parameters of more than 30% compared to common brass connectors. 24k gold plated with gold/copper specific electrolysis technique.
  • Quadruple shielding with double tinned copper braiding and double aluminum foil/Mylar PE reduce EMI/RFI interference.
  • Handmade in Italy.

 

 

 

When we began to see the great results that could give the new conductor MARC ©, our research was focused on developing connectors that could enhance the new cables we were developing. It is well known that the connector is a focal point of the transmission of the audio signal, where the use of conventional brass connectors, can lose even 50% of the performance of a connection, so we started immediately the project Called RCCP, because our goal was to build new connectors with pure copper contacts.

 

The challenge was particularly difficult as it was a matter of redesigning all the connectors, taking into account the greater softness of the copper, which does not adapt to the production of the connectors, as often the contact points are very thin and can be subject to bends.

 

After a process that lasted more than two years, we can assert that Ricable is the first cable manufacturer that realizes a whole series of Hi-Fi Audio Cables (Invictus Series) with fully copper connectors and regarding the two smaller series, the connectors are completely of copper in most of the products, except for some exceptions, where it was necessary to use a copper-tellurium alloy, which in any case is a decidedly superior conductor than brass, generally used in Hi-Fi connectors.

 

All the connectors of the Magnus, Dedalus and Invictus Series are projected and designed by us and are manufactured individually with a special CNC Numerical control technique, re-adapted for the use of copper as raw material.

 

Parts that are not of copper, such as bodies and plastic components, adopt solutions to improve and safeguard the contact points.

 

The result of this painstaking work is impressive. From our performed tests, we had an improvement in the transmission of the electrical parameters of more than 40% compared to the brass connectors and this resulted in a clear improvement even in listening.

 

All connectors are 24k gold plated with gold/copper specific electrolysis technique in order to prevent corrosion and keep a constant performance over time.

 

 

With the advent of the new range, Ricable has introduced a series of important innovations, carrying out a prototyping work supported by technical studies, in order to choose materials and constructive techniques to be combined with the new conductors and connectors, thus completing the production of innovative and more performing cables in every use of the system.

The most innovative technologies have been implemented in the series Invictus, but also the smaller series have those technologies derived from the top of the range, in order to realize a range scaled for needs and characteristics.

The most important technological innovations concern the construction geometries, the insulations and the shields.

New Geometries

With the advent of new conductors MARC ©, we have developed new ways of setting up multi-rows conductors and new rules of interlacing with insulators and shields. The objective is to improve the electrical specifications, which, depending on the type of audio cable, influence the sound performance. In particular we have studied conductive surfaces specific for the type of cable and detorsion cording system with crank rod that allows twisting without stretching the conductors.

New Insulations

In dielectric and non-insulating insulators, we have introduced new materials, generally not used in the production of Hi-Fi cables, demonstrating our aptitude for unconventional experimentation. Among the major innovations, the use of new thermoplastic compounds that allow obtaining better dielectric specifications of polyethylene and a greater flexibility to PVC, and also a better preserving of the copper contact characteristics. Another important novelty is the insertion in some models of a Germanium-based material that impressively improves the background noises in the audio signal.

New Shields

The development process on the shields of the new range has been a continuation of past studies. We have identified the most effective shielding in every project, both for structure and material, in order to determine efficient and never superfluous screens.